PANEL
Type
DLP™ chip
Size and Number
0.67” diagonal, Single chip
Aspect Ratio
16:10
Native Resolution
1920 x 1200 (WUXGA), 2304000 pixels
OPTICS
Lamp Type
370W
Lens F Number and Focal Length
F15.75-25.1mm; f=2.45-3.07mm
Zoom Magnification and Control
1.6x
Focus Control
Manual
Lens Shift
Vertical: 50% - 55% (Manual)
IMAGE AND AUDIO
Brightness
5000 lumens (4000 Eco Mode)
Brightness Uniformity
75%
Contrast Ratio
2500:1
Projection Distance Coverage
1.38m – 5.54m (2.3m-3.7m for 100" image)
Screen Size
60”–240” (1.3m x 0.8m – 5.1 x 3.2m)
Projection Ratio
1.07-1.71:1 (Calculated on 100" image)
Digital Zoom Magnification
2x
Keystone Correction Range
Vertical & Horizontal: +/-30° Manual
Digital Video Scan Systems
1080p / 1080i / 720p / 576p / 480p
MHL Input
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Component Video Scan Systems
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Video / S-Video Colour Systems
PAL / PAL-M / PAL-N / PAL-60 / NTSC / NTSC4.43 / SECAM
Display Modes
Presentation, Standard, sRGB, Movie, User 1 & 2
Built-in Speaker
10W
PORTS AND CONNECTORS
Digital RGB / Analogue RGB Input
Mini Dsub 15 x2
Digital RGB / Analogue RGB Output
Mini Dsub 15 x2
Digital PC / Digital Video / MHL
HDMI / MHL
Digital PC / Digital Video Input
HDMI
S-Video Input
Mini DIN 4-pin
Composite Video Input
RCA
Audio Input L&R
RCA x 2
Audio Input 2
3.5mm stereo mini-jack x 1
Audio Output
3.5mm stereo mini-jack (variable level)
USB Service Port
Type B
Projector Control
Mini D-Sub 9-pin (RS232c)
Network Port
RJ-45 (100Base-TX / 10Base-T) / HDBase-T¹
MECHANISMS
Front Elevation Mechanism
2 x rotary feet (up to 4.5° elevation angle)
RATINGS
Dimensions (W x H x D)
465mm x 112mm x 261mm (excluding protrusions)
Weight
5.4kg
Power Source
100-240 V AC, 50/60Hz
Power Consumption
Modes – Normal: 500W / Eco: 400W
Standby: (LAN on/off) 3W / 0.5W
Lamp Life
Normal: 2000H / Eco: 2500H
Noise Level
Normal: 38dB / Eco: 35dB
Operating Environment
0°-30°C (RH<90%), 30°-40°C (RH<50%)
Storage Environment
-10°C to +60°C
Warranty
2 years
Disclaimer
All data is based on Canon standard testing methods except where indicated.
Subject to change without notice.
All data is based on Canon standard testing methods except where indicated.
Subject to change without notice.
All data is based on Canon standard testing methods except where indicated.
Subject to change without notice.
Footnote
¹ When in standby mode Power on is not accepted as a control command via HDBaseT.
¹ When in standby mode Power on is not accepted as a control command via HDBaseT.
¹ When in standby mode Power on is not accepted as a control command via HDBaseT.